This all natural Hemp Oil Wood Finish is very easy to apply. Simply pour or brush on and wipe away the excess with a rag.
500 ml – Covers approximately 80 square feet
- Food Safe
- No Chemicals
- No additives or preservatives
- NO VOC’s
- 100% Natural Hemp seeds
What makes Fusion’s Hemp Oil different from the stuff I put on salads?
Our hemp oil is made a bit differently than what you put on your salad – this way it doesn’t go rancid, but it also won’t taste very good on your salad!
Can I use Hemp Oil over Fusion Mineral Paint?
Yes you can however we prefer to recommend the Stain & Finishing Oil instead as you can easily paint over it, Hemp Oil is difficult to paint over.
Can I use Fusion Mineral Paint over Hemp Oil?
Not right away. We recommend giving the hemp oil a couple of months to cure before trying to use Fusion over top. If the Fusion laces or beads, the oil is not ready to be painted on. There is no guarantee with this oil that you can 100% successfully paint over it.
Do I have to re-apply Hemp Oil?
It depends on your application. If you have applied the hemp oil to a raw wood surface and want to keep it in great condition, we do recommend re-applying every 6-12 months, or as the wood shows it needs it based on your needs. If you’ve put it over Fusion, you don’t have to reapply unless you want to.
Can I use Hemp Oil outside?
Definitely! Hemp oil adds water resistance to the surface it is applied on. It is great for decks, Adirondack chairs, and picnic tables! For best results, we recommend re-applying the oil at least once a year.
Is Hemp Oil food-safe?
Yes it is. However, we advise against using the hemp oil as food.
Can I use Hemp Oil on my wood floors?
Definitely. For this application, it is best if you can sand the floors down to raw wood, apply the hemp oil in excess, and let it soak in. Leave it for 12-24 hours, then wipe away the excess. If there is no excess, you may need to apply more and repeat the process until your floors are saturated.
Can Hemp Oil be used outdoors?
Yes, Hemp Oil can be used for interior and exterior purposes.
How do I revive old wood with Hemp Oil?
Liberally apply hemp oil to old, dried out wood, and let it soak in. We recommend leaving it overnight, and then removing excess in the morning. If there is no excess, you may need to repeat the process. A lot of older wood does take several applications to be reconditioned.
Check this post for more information: https://fusionmineralpaint.com/hemp-oil-feed-grain/